confusedgrumpy Posted February 27, 2011 Share Posted February 27, 2011 Hello all, I am posting this on several RV and Motor home forums, so if you come across it again apologies. We have an RV, a 2002 R-vision trial-late on a workhorse chassis. Behind the passenger seat, right hand side we have 2 small round chairs, I am informed called captains chairs also a small table that folds up and into a shelf under a window. We would like, if fees able, to take all this out and replace them with 2 two seater bench type seats with a table in between as seen in many motor homes, if possible. To build from new would be financially prohibitive, so. I know I have seen in the past in a related magazine the address of several firms that dismantle old RV’s/ motor homes when their usable life has expired, but cannot for the life of me find anything on the net related(I am not the brightest spark, internet wise). If any of you can point me in any direction with the above I would be most grateful. Regards Malcolm Link to comment Share on other sites More sharing options...
flicka Posted February 27, 2011 Share Posted February 27, 2011 Hi Malcolm & welcome to the forum. IMO a lot will depend on what you want to do. If you want to use the change for additional travel seats, it will be an expensive project as few companies will have experience of fitting rear seat belts to an American RV. If you just want it as an on-site facility it should be viable. Info on you location would help to identify possible sources. As a starter - A couple of lists of M/H breakersmay help:- http://www.ukcampsite.co.uk/directory2/results.asp?type=18 http://www.outdoorholiday.co.uk/home/c10_breakers~dismantlers Good luck Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.