Jump to content

Water Pump


bromleyxphil

Recommended Posts

two thoughts.....

....firstly, once the loo is flushed or tap turned off, the pump should not continue running!

....otherwise, why not simply turn off the pump at the main switch on your control panel overnight, and throw a cupfull of water into the loo, instead of using the electric flush!!

Link to comment
Share on other sites

It is possibly the pump pressure switch set a bit too high or a faulty in the punp valves. If you are not happy to fiddel with teh punp I suggest maybe your wife is very delicately asked to use a bit more water and maybe then the pump will turn off.

Another possibilty is air is leaking into the pump and if only a smallamount of water floes it does not pump it clear of the valves and so pressure does not built up enough. So bit more water being used and it may work fine.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...