whbs Posted March 27, 2013 Share Posted March 27, 2013 Love our 56 reg Symbol but the blinds rattling when in motion drive one to distraction. Anyone any ideas to shut them up? :-D Link to comment Share on other sites More sharing options...
BGD Posted March 27, 2013 Share Posted March 27, 2013 Turn the stereo up? Link to comment Share on other sites More sharing options...
BGD Posted March 27, 2013 Share Posted March 27, 2013 More practically: There's some sheets of sort of furry stuff you can get, with self adhesive backing ( I've seen it in whiet and brown at DIY shops). Maybe you can cut this stuff into little bits that you can attach to the window frame internally, at the point where the blind parts are rattling against it. Link to comment Share on other sites More sharing options...
paulmold Posted March 27, 2013 Share Posted March 27, 2013 Do a search on Auto-sleepers Owners Forum. It's a question that's been asked many times. (afterall you are already a member) Link to comment Share on other sites More sharing options...
Derek Uzzell Posted March 27, 2013 Share Posted March 27, 2013 ASOC "Ideas Sheets" webpage is here: http://www.asoc.uk.com/tech_group/ideas_sheets.htm The relevant 'rattling blinds' sheets are 46 and 89. Link to comment Share on other sites More sharing options...
colin Posted March 27, 2013 Share Posted March 27, 2013 A little aside, on our globecar we found the 'click stop' stays rattled, a knicker elastic tie near the top sorted that out. Link to comment Share on other sites More sharing options...
Mickt Posted March 27, 2013 Share Posted March 27, 2013 I had the same problem and found that the blinds ratling was comeing from the actual cassette they are in . Remedy take them apart and increase tension on the internal spring. Link to comment Share on other sites More sharing options...
peterjl Posted March 27, 2013 Share Posted March 27, 2013 Hi They also rattle on our Globecar so we use some oddments left over of the soft rubbery non slip stuff put on shelves. We push a small piece in top and bottom before we set off and, lo and behold,no rattles. Peter Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.