Sparky7 Posted May 13, 2014 Share Posted May 13, 2014 Has anyone else found black particles (looks like some sort of mould) when using the pink aqua rinse on flushing their WC? The solution was made up as per instructions, but I'm not going to bother with it after the mess it makes! Link to comment Share on other sites More sharing options...
Robinhood Posted May 13, 2014 Share Posted May 13, 2014 It's a well known problem from way back which was supposed to have been resolved by Thetford revising the formula, but people still appear to experience issues. See here: http://www.outandaboutlive.co.uk/forums/Motorhomes/Motorhome-Matters/Black-specks-in-Thetford-flush-water/23968/ Link to comment Share on other sites More sharing options...
Sparky7 Posted May 13, 2014 Author Share Posted May 13, 2014 Thanks for that Robin. I'll try taking the wretched stuff back to the shop! Link to comment Share on other sites More sharing options...
graham Posted May 13, 2014 Share Posted May 13, 2014 We always used aquarinse until a few years ago when we had exactly your problem. Trouble was although I thoroughly rinsed out the tank and switched to plain water I never totally got rid of it. I have never used it on subsequent vans and not had the problem again. Link to comment Share on other sites More sharing options...
Corky 8 Posted May 13, 2014 Share Posted May 13, 2014 We found this problem of black mould when we first started using the rinse years ago, I cleaned the rinse cistern out with a very mild bleach to kill the black mould and only fill it with clean water , we then started using the rinse in diluted form in a spray bottle, same effect ,but no Black bits, our M/H toilet is the direct flush type (no Cistern) but we still use the rinse in a spray bottle. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.