gocro Posted May 13, 2014 Share Posted May 13, 2014 When we purchased our 2007 Stardream it had a tow bar which we had the dealer remove as it wouldn't have fitted on the drive otherwise.The electrics socket was retained and bolted to the chassis,I tried it today with a trailer board and found it to be totally dead. the feed for it comes all the way from the cab area so I assume it may have been plugged into the loom and has been disconnected.Is there a standard socket on the loom for this, if so , where is it? Link to comment Share on other sites More sharing options...
Billggski Posted May 14, 2014 Share Posted May 14, 2014 Phone the dealer, it sounds like it was disconnected. Tracing back what they did could be a nightmare. (Assuming they can remember who did it) Link to comment Share on other sites More sharing options...
tonyg3nwl Posted May 14, 2014 Share Posted May 14, 2014 Just a suggestion, it could be afuse has blown or been removed. Might be worth checking around the fuseboxes..sorr dont know which one, but likely to be rated 10 or 20 amps. worth a look around. tonyg3nwl Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.