petenbev Posted October 22, 2017 Share Posted October 22, 2017 We've bought the air suspension kit at one of the NEC stands and just wondered if anyone knew of someone who would fit it for us in the midlands area,we were going to let the suppliers fit it but we were looking at early Jan (which doesn't seem as far away now). TIA :-) Link to comment Share on other sites More sharing options...
Billggski Posted October 22, 2017 Share Posted October 22, 2017 If it's the rubber bellows and air valve/compressor, then it's just unscrew the bump stop and replace with the bellows. Route the tube to you compressor/air valve and that's it. A competent handyman, or your local garage should take less than an hour. Link to comment Share on other sites More sharing options...
petenbev Posted October 22, 2017 Author Share Posted October 22, 2017 Yes it is the bellows kit,the one where you can adjust the air pressure from the buttons near the drivers seat. unfortunately the diyer is a tad incompetent but I'll pop down to the local garage and ask them I know they do work on motorhomes. thanks Link to comment Share on other sites More sharing options...
Brian Kirby Posted October 22, 2017 Share Posted October 22, 2017 If they won't / can't, try "Diamond" Dave Newell. Dave Newell Leisure Vehicle services Unit P Court Works Industrial Estate Bridgnorth Road Tweedale Telford TF7 4JB Tel: 01952 587702 See here: http://tinyurl.com/ybt2luqo Link to comment Share on other sites More sharing options...
petenbev Posted October 22, 2017 Author Share Posted October 22, 2017 Thanks Brian Link to comment Share on other sites More sharing options...
Bop Posted October 22, 2017 Share Posted October 22, 2017 Pete, which kit did you get. I am thinking of fitting the same style system so any info would be most helpful. Very best, Andrew Link to comment Share on other sites More sharing options...
Derek Uzzell Posted October 23, 2017 Share Posted October 23, 2017 Brian Kirby - 2017-10-22 3:34 PM If they won't / can't, try "Diamond" Dave Newell. Dave Newell Leisure Vehicle services Unit P Court Works Industrial Estate Bridgnorth Road Tweedale Telford TF7 4JB Tel: 01952 587702 See here: http://tinyurl.com/ybt2luqo I second Brian’s suggestion. As the kit purchased at the NEC evidently includes a compressor that will allow the system’s air-pressure to be easily adjusted, installation will requiire more care than if a basic kit were involved. I would be very wary of entrusting the work to anyone who had not done it before and/or was not well versed in the technical aspects of motorhomes. I’d DIY the task, but I’m sure I’d take a LOT longer than an hour to do it. Link to comment Share on other sites More sharing options...
starvin marvin Posted October 23, 2017 Share Posted October 23, 2017 Just get the supplier to fit it. Simples. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.