steveandlisa Posted July 3, 2018 Share Posted July 3, 2018 Hi, We always seem to have a problem draining the waste tank on our Bailey Approach 740se, this is to say the tank drains ok on its own but struggles to flow from the tank into the waste catcher when the flexi hose is attached. I`m guessing because there is a slight dip in the flexi hose to the catcher tank that gravity or an airlock could be the problem. I`m now wondering if I should let the waste tank fill and then open the stop valve to see if it drains better. Any thoughts on this one please. Regards Steve Link to comment Share on other sites More sharing options...
Adiebt Posted July 4, 2018 Share Posted July 4, 2018 The waste tank outlet is notoriously slow , there is a mod / fix for it , try looking on YouTube or other forums , I’ve never bothered as I drain mine into a waste hog on site so the tank is always “ empty “ . The few times I’ve drained down at a motorhome service point I just sit back n surf the web ! B-) Link to comment Share on other sites More sharing options...
Adiebt Posted July 4, 2018 Share Posted July 4, 2018 http://forums.motorhomefacts.com/231-bailey-motorhomes/108430-slow-grey-water-emptying-solution.html Found it ! Link to comment Share on other sites More sharing options...
steveandlisa Posted July 4, 2018 Author Share Posted July 4, 2018 Adiebt - 2018-07-04 11:53 AM http://forums.motorhomefacts.com/231-bailey-motorhomes/108430-slow-grey-water-emptying-solution.html Found it ! Thanks Adiebt, I`ll take a look a my pipework now ;-) Steve Link to comment Share on other sites More sharing options...
witzend Posted July 4, 2018 Share Posted July 4, 2018 I always let my tank fill to at least 3/4 and empty after a drive so all contents are fluid leaving it drain into a container when in use allows all solids to settle onto bottom of tank and in hose Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.