hullcity Posted October 30, 2018 Share Posted October 30, 2018 Above is in an Elddis Autoquest 400 Motorhome 2002 registration Can any one help me with how to replace the manual piezo switch on a Truma gas fire. I’ve managed to remove the current one as I had no ignition and have bought a new one but not sure of connections ? I removed the cover and didn’t expect it to fly off ! This meant I couldn’t get pics as the thing flew off leaving me holding the cover and quite a few wires everywhere ! Pictures would therefore help if anyone is that organised Thanks Matt Link to comment Share on other sites More sharing options...
Derek Uzzell Posted October 30, 2018 Share Posted October 30, 2018 Not sure how well this will help you, but the following link is to Truma’s Installation Instructions for S 3002 appliances https://dealernew.truma.com/_anweisungen/Truma_Katalog/pdf_verzeichnis/30_000/30050_93100.pdf and Drawing “G” on Page 2 shows the piezo igniter’s position on an S 3002 (P) heater. Link to comment Share on other sites More sharing options...
hullcity Posted October 30, 2018 Author Share Posted October 30, 2018 Thanks , that is useful, gives me an idea of where to start now, cheers Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.