Jump to content

Loss of 12v supply.


Recommended Posts

My 05 Elddis motorhome has a Clipsal combined voltage/water/pump/waste water indicator. Just recently suffered a fault when switching on to 12v from leisure battery, it does not function. switch to vehicle battery setting and it works ok. When trying the same toggle switch to leisure battery setting there is a low quiet thud noise but no power transfer.

Have taken the unit off the wall to check there may be loose wire ect but everything seems fine.

As anyone had this happen, and what may be the cause, the only thing I can think off is it may be a failed contact on the toggle switch itself. Thanks for any help.


Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...