Alan Wheeler Posted July 30, 2023 Share Posted July 30, 2023 I have a Hymer B598PL which has a damaged shower trap that needs replacing. The shower trap is under the shower floor and between the two floors. There is not enough space to remove the shower trap between the floors so do I have to dismantle the shower and lift the shower floor to access the trap? Or is there another way? Link to comment Share on other sites More sharing options...
thebishbus Posted July 31, 2023 Share Posted July 31, 2023 I repaired one of ours without removing anything. It had broken away from the shower base. I used "Ever Build Stixall". I spread the Stixall allround the broken top of the trap and shower base hole, then using wires pulled the trap into place, fixed it there temporary to allow the Stixall to set, cleaned off any excess, no trouble since. BrianB. Link to comment Share on other sites More sharing options...
laimeduck Posted July 31, 2023 Share Posted July 31, 2023 I'll second Stixall. Along with gaffer tape, a hot glue gun and a hammer it's a must in the tool kit! Link to comment Share on other sites More sharing options...
onecal Posted July 31, 2023 Share Posted July 31, 2023 Hi Tech 7 is excellent for that job also. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.