Fiat Ducato Posted September 12, 2015 Share Posted September 12, 2015 Afternoon Took this out of my 1997 Fiat Ducato Auto Roller motorhome, it was next to the control panel, wasn't working so took it out changed battery and hey presto, its a little digital clock, coukld be handy. But I can't figure out how to set it and change the time, looked all around it, back, front, even took it apart, nothing. Weird It looks like an Original Fiat part as well presume that's what that logo is? Paul Link to comment Share on other sites More sharing options...
maggyd Posted September 12, 2015 Share Posted September 12, 2015 Well at the moment it looks as if its reading 5 seconds !! just increase either pressing where the plus sign is or moving the dial up or down until you get the time you want! these digital clock things have to be played with until you get it right. Link to comment Share on other sites More sharing options...
Robbo Posted September 12, 2015 Share Posted September 12, 2015 If there aren't any controls on the front face, you could always take the battery out and reinsert it at midnight. That should set it for the correct time. The LR44 is the battery type and the + UP is just telling you which way to insert the battery - but you were probably already aware of that !!! Don't know what the other arrows mean on the back face. It doesn't seem very user friendly. Link to comment Share on other sites More sharing options...
Keithl Posted September 12, 2015 Share Posted September 12, 2015 The arrows indicate which way to insert the battery cover and then turn it to lock, ie Locked and Unlocked. It is 180 degrees out at the moment! In the first photo there are 2 green dots which appear black in the last photo, are these buttons or holes hiding buttons? Try poking something like a match or cocktail stick into them. Keith. Link to comment Share on other sites More sharing options...
Brambles Posted September 12, 2015 Share Posted September 12, 2015 It is a little radio controlled time clock. When it picks up a time radio signal it will automatically correct itself..... if is working of course. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.