brandane Posted December 3, 2021 Share Posted December 3, 2021 I have a gemini 931t alarm. The red led light on the dash is now permanently on and the key fob doesn't work. The guideance says to reset simply insert the touch fob into the touch pad but of course this doesn't do anything. Unfortunately the firm that installed the system has gone out of business. anyone got any ideas? Link to comment Share on other sites More sharing options...
arthur49 Posted December 3, 2021 Share Posted December 3, 2021 Have you tried other installers eg here https://www.autodefence.co.uk/gemini-931t-can-bus.html or here http://www.mobileautomotivesystems.co.uk/products/alarm-immobilisers/gemini-931tmh.html Link to comment Share on other sites More sharing options...
peterjl Posted December 3, 2021 Share Posted December 3, 2021 I had this problem after some work that required disconnecting the battery. Fixed by disconnecting the plug under the dashboar on the right with the fuses.. disconnect then reconnect re booted and sorted the problem I emailed Gemini direct and they sent the instructions. I will try and find email when I get home but it was 4 years ago Peter Link to comment Share on other sites More sharing options...
peterjl Posted December 4, 2021 Share Posted December 4, 2021 Hi Alan I have found email from Gemini with instructions and pics of how to reset. If you would like me to copy you in please pm me your email address. Peter Link to comment Share on other sites More sharing options...
brandane Posted December 9, 2021 Author Share Posted December 9, 2021 Hi, All sorted thanks to excellent e mail support from Gemini. Link to comment Share on other sites More sharing options...
rayc Posted December 9, 2021 Share Posted December 9, 2021 I had a similar problem and also had to disconnect and reconnect the plug that interconnects the alarm into the OBD socket. It is possible for the alarm to be non functioning after service when the technician has forgot to plug it back in after using the OBD diagnostics. Link to comment Share on other sites More sharing options...
Gaztop Posted January 22, 2023 Share Posted January 22, 2023 On 12/4/2021 at 3:01 PM, peterjl said: Hi Alan I have found email from Gemini with instructions and pics of how to reset. If you would like me to copy you in please pm me your email address. Peter i know this is an old post but if i could have the info also many thanks Link to comment Share on other sites More sharing options...
rayc Posted January 22, 2023 Share Posted January 22, 2023 31 minutes ago, Gaztop said: i know this is an old post but if i could have the info also many thanks Remove the cover over the fuse box located by the drivers knee [ignition off]. Unplug the alarm connector from the OBD socket. Leave for 30 seconds and then replace. The alarm should now be working normally. Link to comment Share on other sites More sharing options...
peterjl Posted January 22, 2023 Share Posted January 22, 2023 Hi Gaztop. sorry, I no longer have those instructions. I have sold that Moho and deleted the emails. that said the instructions above are correct, my instructions merely added a picture to show which plug to pull. good luck peter Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.