CBE PC200 Self Installed - Clicking Error

[ElliottA]

Hi

I have installed a CBE PC200 kit my my van build and everything was all good, until today.

I was installing a solenoid value for water draining, however I connected this to the fridge feed as that is not installed yet.   The inline switch I installed for the test I wired up the supply and load incorrect and the PC200 kit went off, slowly coming back on.

Now however when I turn the interior lights on they glow on slowly and the pump switch on the PC200 when pressed, just makes the remote flash and beep consistently and pump does not work. Any help appreciated.

[Labby]

If your distribution/fuse box is DS300 unit which contains the relays for these operations it may be worth checking the multi-plugs on the unit for possible damage , white plug with 9 x pins is involved with the lighting and water pump power supplies. (and heating/boiler + awning light)