Ubiquitous Posted August 29, 2023 Share Posted August 29, 2023 How difficult is it to fit a microwave? A fitted microwave is not an option in a Roller team 746 or will it be the case of carrying one and plug it in when required? Quote Link to comment Share on other sites More sharing options...
Geeco Posted August 30, 2023 Share Posted August 30, 2023 I have looked at the Rollerteam website 360 view and it appears there are 3 cupboards, 2 small & 1 longer unit beside the stove. One of these could possibly provide sufficient space to fit a unit. That area is close to the kitchen and could provide access to power as the stove is next to the cupboards. Fitting the unit is straight forward once you have identified the unit will fit. Mine is held in place by screws coming up from underneath into the feet. Cheers, Quote Link to comment Share on other sites More sharing options...
nicklee Posted August 30, 2023 Share Posted August 30, 2023 Measure the size and determine the placement, it is easy to install. Quote Link to comment Share on other sites More sharing options...
thebishbus Posted August 30, 2023 Share Posted August 30, 2023 If installing it , keep it as low as possible because of its weight. Brian B Quote Link to comment Share on other sites More sharing options...
colin Posted August 30, 2023 Share Posted August 30, 2023 I would note that microwaves have space requirements beyond their size to allow for ventilation, the instruction manual should give minimum gaps to be allowed. 1 Quote Link to comment Share on other sites More sharing options...
onecal Posted September 4, 2023 Share Posted September 4, 2023 Hi They usally do , Not all microwaves can be fitted in a cavity and must only be fitted on a worktop A good rule of thumb is 10-15 cm on the sides with 15-20cm on the top and 15-20cm at the back for good ventilation Regards Quote Link to comment Share on other sites More sharing options...
Ubiquitous Posted September 28, 2023 Author Share Posted September 28, 2023 Thank you all for your info on this subject, However, the deal was not right so moved onto another dealer. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.