Jump to content

Bessacarr E769 Hab door issue


Recommended Posts

Hi all, looking for advice. Whilst loading the MH on a windy day, the wind pulled the door from my hand and flung it open. Now the top is catching when trying to close it. I can see where, as it has cut the door seal with the locking pins. They are hidden hinges that go into the door. Can I and how do I adjust it back to normal? Reluctant to take it off until I’ve heard from others. 
Thanks in advance

Link to comment
Share on other sites

E769 models were based on a Fiat Ducato X250 'Maxi' with 3.0litre motor and Al-Ko tandem-axle rear chassis. They were built between 2007 (when production of the X250 range had just begun) and 2014 (when the X290 range took over and the 3.0litre power-plant was dropped from the Ducato line-up).

As onecal says, there was a Swift Group habitation-door recall. Recall details in these 2010 forum threads.

https://www.motorhomefun.co.uk/forum/threads/recall-by-swift-of-habitation-doors.19668/

https://www.motorhomefacts.com/threads/recall-letter-from-swift.64013/

Link to comment
Share on other sites

Thanks for the responses. I ended up taking the hinge out, disassembled it, and adjusted what I could to make it tighter and it seems to have fixed the issue.

Very strange hinge, just had a cog and a toothed plate in to so I don’t know if it had jumped a tooth.

IMG_9128.jpeg

IMG_9126.jpeg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...