Bispace 300 tent

[mike.walker]

Can anybody please help with the setting up procedure of the Bispace 300 tent, not been used for quite a while and lost instructions. I would appreciate any help with this.

Thankyou Mike

[Keithl]

Hi Mike and welcome,

A quick Google search came across this thread on the UKCampsite forum with a list of instructions for a similar tent from Coleman... https://www.ukcampsite.co.uk/chatter/display_topic_threads.asp?ForumID=32&TopicID=157764&ThreadPage=1

As requested, please find the following hints and tips for the above tent.

1.     Ensure that all the zips on the doors and porch are done up before starting.
2.     Lay out the outer tent flat on the ground, so that you are able to see all the pole sleeves. The poles are colour coded to the relevant pole sleeve.
3.     Assemble all of the poles and lay to one side.
4.     The 2 long black poles need to be inserted into the diagonal sleeves with black taping and they will intersect each other in the centre.
5.     Put all the other poles in the relevant pole.sleeves (according to colour).
6.     Do not put the ends of the poles into the eyelets until all poles are in the sleeves (the tent should still be flat on the ground).
7.     Then put the main cross-over poles (black poles) into their eyelets (this will be a bit difficult for one person but it is possible), if there are two people get opposite ends of one of the long black poles and push the pole up into an arc (it will feel quite heavy as all the other poles and fabric will be supported by it) then put the ends into an eyelet (either eyelet will be fine).
8.     Do the same with the other long black pole, you should now have a dome shape in the centre with the other poles hanging.
9.     Insert the other poles into their eyelets.
10.     You are now ready to peg out the tent.
11.     Peg out the main dome (2 black poles) first to give you stability.
12.     Then peg out the rest of the tent using the guy ropes to give tension.
13.     Hang the inner room(s) into the main tent, again the toggles and eyelets are colour coded so you should be able to get the bedrooms positioned correctly.
14.     Peg out the bedroom(s). Place the additional PE ground sheet in the domed area and peg out.

Regards
Consumer Services Department

Hopefully this will be sufficient for you to erect yours.

Keith.