Maltinggo Posted March 7, 2020 Share Posted March 7, 2020 Any help appreciated for a newbie. Just went into the motorhome this morning at home, filled the freshwater tank about half, and pressed the tap in the sink and low and behold no water and no usual sound of the pump. I looked inside the water container and took out the Whale submersible pump, it looked its 13 years, so I decided to buy a new one, which I have fitted, bot when I press the water tap in the sink nothing happens, no water or noise of pump. I have the 12 volt switch turned on at the panel above the door, I cannot see any other switch, could anybody help please ? Thank you Link to comment Share on other sites More sharing options...
Keithl Posted March 7, 2020 Share Posted March 7, 2020 What is the voltage of your habitation battery? It isn't flat by any chance after standing? Do lights turn on, etc. to check. Keith. Link to comment Share on other sites More sharing options...
colin Posted March 7, 2020 Share Posted March 7, 2020 Is it pressure or switch operated system? if switch check connections going to tap. Link to comment Share on other sites More sharing options...
Maltinggo Posted March 7, 2020 Author Share Posted March 7, 2020 Battery indicator A1 Link to comment Share on other sites More sharing options...
Billggski Posted March 7, 2020 Share Posted March 7, 2020 Try the owners' club https://www.dethleffs.co.uk/service/dethleffs-owners-club/ You'll find members with the same model. Have you got the tap symbol on the control panel.? You have to switch the pump on using the menu if it's not showing. Link to comment Share on other sites More sharing options...
Maltinggo Posted March 7, 2020 Author Share Posted March 7, 2020 Cannot find a switch anywhere, when pressing the lever on the tap I can hear a click but nothing happens ? Link to comment Share on other sites More sharing options...
Maltinggo Posted March 7, 2020 Author Share Posted March 7, 2020 No tap symbol on the control panel above the door, I will check the owners club, Thank you Link to comment Share on other sites More sharing options...
Billggski Posted March 8, 2020 Share Posted March 8, 2020 If there's no tap symbol, just press the menu button and the > until one appears. http://www.aandncaravanservices.co.uk/resources/Schaudt%20%20DT%20220%20C%20Operating%20Instruct.pdf Link to comment Share on other sites More sharing options...
colin Posted March 8, 2020 Share Posted March 8, 2020 Have you checked the bathroom tap as well? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.